PhenX - refractive error - adult protocol 111401

General Details:

Name:
PhenX - refractive error - adult protocol 111401
Steward:
PhenX
Definition:
The refractive error of each eye is measured using the Humphrey Automated Refractor (Carl Zeiss Meditec, Dublin, CA). After use of the autorefractor, the autorefractor-generated refractive error for each eye is dialed in to the phoropter and the participant's visual acuity is checked. If the visual acuity is worse than 20/20, then subjective refraction is performed. This protocol uses the Humphrey Automated Refractor (Carl Zeiss Meditec, Dublin, CA). Other instruments can be used to measure refractive error. If other instruments are used, the reproducibility of the measurements should be comparable to those acquired with this protocol. In addition, when other instruments are used to collect these measurements, the manufacturer and model of equipment should be recorded. These other devices may require some different steps than are described in this protocol. Investigators should follow the equipment manufacturer's instructions to ensure quality control.
Registration Status:
Qualified

Designations:

Designation:
PhenX - refractive error - adult protocol 111401
Tags:
Long Common Name
Designation:
Refractive error adult proto
Tags:
Short Name

Designations:

Definition:
The refractive error of each eye is measured using the Humphrey Automated Refractor (Carl Zeiss Meditec, Dublin, CA). After use of the autorefractor, the autorefractor-generated refractive error for each eye is dialed in to the phoropter and the participant's visual acuity is checked. If the visual acuity is worse than 20/20, then subjective refraction is performed. This protocol uses the Humphrey Automated Refractor (Carl Zeiss Meditec, Dublin, CA). Other instruments can be used to measure refractive error. If other instruments are used, the reproducibility of the measurements should be comparable to those acquired with this protocol. In addition, when other instruments are used to collect these measurements, the manufacturer and model of equipment should be recorded. These other devices may require some different steps than are described in this protocol. Investigators should follow the equipment manufacturer's instructions to ensure quality control.
Tags:
Source: Regenstrief LOINC

Properties:

Key:
Related Names
Value:
PanPanelPANEL.PHENX
PanlPnlPoint in time
RandomRefractive error adult proto
Key:
Related Codes
Value:
Code SystemCodeCode TextCode Version
https://www.phenxtoolkit.org111401refractive_error___adult
Key:
Fully-Specified Name
Value:
ComponentPropertyTimeSystemScaleMethod
PhenX - refractive error - adult protocol 111401-Pt^Patient-PhenX
Key:
Basic Attributes
Value:
ClassTypeFirst ReleasedLast UpdatedChange ReasonPanel Type
PANEL.PHENXClinicalVersion 2.36Version 2.66Updated the PhenX ID from "PhenX." to "PX" in Survey Question Source field to align with the variable identifier used in the PhenX Toolkit.; Added the PhenX protocol ID to the Component to clearly define the protocol version for which this panel is based upon.Panel

Identifiers:

Source:
NLM
Id:
XybhnGphoe
Version:
1.0
Source:
PhenX
Id:
111401
Version:
Source:
LOINC
Id:
62706-7
Version:
2.69